88 pages for “q=cat%3Dsonde%26q%3Dcat%253Dpompe%2526q%253Dcat%25253Dsonde%252526q%25253Dq%2525253Dcooling%2525252Btowers”
No page contains all the words: results containing some of them.
Did you mean can one q can 3dpompe 260 3dcat 253dsonde 2526q 253dq 25253dcooling 25252btowers?
pH and Redox pH electrodes 0 – 14 pH 13 models Details → pH and Redox Redox electrodes ± 1,500 mV 9 models Details → Disinfectants ECL open cells Free chlorine 0 – 10 mg/l Details → Disinfectants SCL closed cells 8 oxidants Also for hot water Details → Conduct …
They bring the water to be measured into contact with the electrodes. Depending on the probe and the system, the electrode is installed in by-pass, in-line or by immersion. Flow-through, in by-pass In-line, on the pipe Immersion, in the tank Manifold for cooli …
Also in: Installation types · Flow-through · Data sheet · Installation in by-pass
Combination electrodes for measuring pH in water with a pH between 0 and 14, including low-conductivity water: for swimming pools, drinking water, wastewater and industrial water. Range 0 – 14 pH Also for low-conductivity water BNC or SN6 connection In by-pass …
Also in: Installation · Data sheet · Available models
Combination electrodes for measuring the Redox potential (ORP), that is the disinfecting power of the water, in swimming pools, waterworks and industrial plants. Suitable for all types of water, including low-conductivity water. Range ± 1,000 mV (± 1,500 mV) A …
Also in: Installation · Data sheet · Available models
The electrode must be chosen according to the actual operating conditions: several external factors can alter the measurement. Dirty diaphragm Deposits on the porous diaphragm generate spurious potentials and therefore measurement errors. Depending on the appl …
Also in: The reference electrode · How pH is measured · pH control systems
… potential shift relative to the corrosion potential is applied to the test electrodes and the resulting current is measured: their ratio gives the instantaneous corrosion rate, expressed in MPY (mils per year). 2 Localised corrosion The probe also measures ele …
Also in: Use and maintenance · Data sheet
All probes measure conductivity according to the conductive principle. ECDC PVDF body, graphite electrodes. Model Mounting Connection Range K factor Temperature compensation ECDC/1 In-line / by-pass R3/4" 0 – 20 mS 1 – ECDCC/1 In-line / by-pass R3/4" 0 – 20 mS …
Also in: Installation · ECDC · ECDI
The probe is installed in one of the Giemme probe holders: 1 In by-pass In a flow-through probe holder, installed in by-pass on the pipe. Probe holders → 2 In-line In a probe holder mounted directly on the pipe. Probe holders → 3 Immersion In an immersion prob …
The probe is installed in one of the Giemme probe holders: 1 In by-pass In a flow-through probe holder, installed in by-pass on the pipe. Probe holders → 2 In-line In a probe holder mounted directly on the pipe. Probe holders → 3 Immersion In an immersion prob …
The probe is installed in one of the Giemme probe holders: 1 In by-pass In a flow-through probe holder, installed in by-pass on the pipe. Probe holders → 2 In-line In a probe holder mounted directly on the pipe. Probe holders → 3 Immersion In an immersion prob …
The probe is installed in one of the Giemme probe holders: 1 In by-pass In a flow-through probe holder, installed in by-pass on the pipe. Probe holders → 2 Immersion In an immersion probe holder, directly in the tank or basin. Probe holders →
Probes with graphite, stainless steel or high-linearity electrodes, based on the conductive or inductive principle. Conductive Four series: PVDF body with stainless steel electrodes (0 – 200 µS or 0 – 5 mS) or graphite electrodes (0 – 20 or 0 – 200 mS), stainl …
Also in: Electrode positioning · Probe positioning · Measuring principle of the inductive probe · Probe data sheets
… → Versions for every type of water Single or double junction combination electrode, resistant to acids and bases, high temperatures and hydrofluoric acid, also suitable for low-conductivity water; available in a self-cleaning version. pH electrodes → Jet self- …
Also in: Electrode positioning · pH electrodes · Probe data sheet · LDspH with self-cleaning
… −5 / +50 °C 0.1 °C Fluorescence measurement with temperature compensation; probe in by-pass (NPED probe holder) or immersion. Probe data sheets
Also in: Electrode positioning · Dissolved oxygen probes · The controller · Dissolved oxygen control
Electrode positioning is defined according to the characteristics of the installation and of the water to be analysed. In by-pass The probes are housed in a PEF flow-through probe holder or an NPED probe holder, connected to a water tapping point at the tank o …
Also in: Redox electrodes · Probe data sheet · System components · The controller
Conductive probes – ECDC PVDF body, graphite electrodes. Model Mounting Connection Range K factor Temperature compensation ECDC/1 In-line / by-pass R3/4" 0 – 20 mS 1 – ECDCC/1 In-line / by-pass R3/4" 0 – 20 mS 1 NTC 10K ECDCCPT/1 In-line / by-pass R3/4" 0 – 20 …
Also in: Conductive probes – ECDI · Conductive probes – ECDHL · Conductive probes – EICDC · Inductive probes
… pressure Maximum 1 bar Optics Sapphire glass Position By-pass or immersion Probe data sheets
Also in: ETORB2 probe · Turbidity probe · Control principle · In by-pass or immersion
pH electrodes Electrode Pressure Connection Body Minimum conductivity Junction Temperature Cable Diameter Notes EPHS 7 bar (3.5 bar) BNC Epoxy 100 µS – 70 °C (80 °C) 0.8 m 12 mm – EPHM 7 bar (3.5 bar) BNC Epoxy 100 µS – 70 °C (80 °C) 4.5 m 12 mm – EPHL 7 bar ( …
Also in: Redox electrodes · Basic components · Operation · System remote control
… characteristics of the water and by the chlorine dosed: the three continuous probes differ in how many of these variables influence the measurement; the DPD method reads a sample under its own conditions. Redox The probe records every variation in potential wi …
Also in: Sodium hypochlorite · Redox: an indirect measurement · Amperometric cells: a direct, continuous measurement · The Redox potential of water and its variations
pH electrodes Electrode Pressure Connection Body Minimum conductivity Junction Temperature Cable Diameter Notes EPHS 7 bar (3.5 bar) BNC Epoxy 100 µS – 70 °C (80 °C) 0.8 m 12 mm – EPHM 7 bar (3.5 bar) BNC Epoxy 100 µS – 70 °C (80 °C) 4.5 m 12 mm – EPHL 7 bar ( …
Also in: Basic components · Operation · System remote control · Closed (membrane) amperometric cells – Free chlorine
pH electrodes Electrode Pressure Connection Body Minimum conductivity Junction Temperature Cable Diameter Notes EPHS 7 bar (3.5 bar) BNC Epoxy 100 µS – 70 °C (80 °C) 0.8 m 12 mm – EPHM 7 bar (3.5 bar) BNC Epoxy 100 µS – 70 °C (80 °C) 4.5 m 12 mm – EPHL 7 bar ( …
Also in: Basic components · Operation · System remote control · Colour-coded status indication
Redox electrodes Electrode Range Pressure Connection Body Minimum conductivity Junction Temperature Cable Diameter Notes ERhS ± 1,000 mV 7 bar (3.5 bar) BNC Epoxy 100 µS – 70 °C (80 °C) 0.8 m 12 mm – ERhM ± 1,000 mV 7 bar (3.5 bar) BNC Epoxy 100 µS – 70 °C (80 …
Also in: Basic components · Operation · System remote control
Redox electrodes Electrode Range Pressure Connection Body Minimum conductivity Junction Temperature Cable Diameter Notes ERhS ± 1,000 mV 7 bar (3.5 bar) BNC Epoxy 100 µS – 70 °C (80 °C) 0.8 m 12 mm – ERhM ± 1,000 mV 7 bar (3.5 bar) BNC Epoxy 100 µS – 70 °C (80 …
Also in: Basic components · Operation · System remote control
… – 0.37 kW Details → Storage and mixing Static mixers 1.1/4" – 2" Details → Probes Probe holders Flow-through In-line Immersion Details → Water treatment Magnetic scale inhibitors 1/2" – 4" No power supply Details → Tell us the characteristics of your system: w …
… dioxide) are available. Legionella: risks, regulations and treatments → Three electrodes, no membrane The cell has no semi-permeable membrane and features three measuring electrodes; it operates from 5 to 70 °C and up to 8 bar. Ball-type self-cleaning The ball …
Also in: Data sheet · Measuring principle of the closed cell
… free chlorine, compensating for pH and temperature. SCL cells → Flow-through probe holder In PMMA, with sample flow rate adjustment and flow sensor, which stops dosing when there is no circulation. Probe holders → Dosing pump Solenoid dosing pump with adjustab …
Also in: Operation · System remote control · Colour-coded status indication · Closed (membrane) amperometric cells – Free chlorine
Changing the probe changes the measured parameter: a single controller for all the parameters of the plant. The probes are installed in flow-through probe holders (approximately 30 l/h of sample water), in-line or immersion; the data sheets are further down. 1 …
Also in: pH electrodes · Redox electrodes · Conductive probes – ECDC · Conductive probes – ECDI
Electrode positioning is defined according to the characteristics of the installation and of the water to be analysed. In by-pass The probes are housed in a PEF flow-through probe holder or an NPED probe holder, connected to a water tapping point at the tank o …
Also in: pH electrodes · Redox electrodes · Conductive probes – ECDC · Conductive probes – ECDI
Panel-mount controllers connect to the same probes as the LD controllers; the data sheets are further down. pH Combination electrodes, also double junction, self-cleaning or for low conductivity. pH electrodes → Redox Combination Redox (ORP) electrodes, also h …
Also in: pH electrodes · Redox electrodes · Conductive probes – ECDC · Conductive probes – ECDI
The probes are installed in the flow-through probe holder or in the panel manifold, on the recirculation water. Conductive conductivity Various measuring ranges, from 0 – 300 µS to 0 – 300 mS, with temperature compensation. ECD probes → Inductive conductivity …
Also in: pH electrodes · Redox electrodes · Conductive probes – ECDC · Conductive probes – ECDI
pH electrodes Electrode Pressure Connection Body Minimum conductivity Junction Temperature Cable Diameter Notes EPHS 7 bar (3.5 bar) BNC Epoxy 100 µS – 70 °C (80 °C) 0.8 m 12 mm – EPHM 7 bar (3.5 bar) BNC Epoxy 100 µS – 70 °C (80 °C) 4.5 m 12 mm – EPHL 7 bar ( …
Also in: Redox electrodes · Conductive probes – ECDC · Conductive probes – ECDI · Conductive probes – ECDHL
pH electrodes Electrode Pressure Connection Body Minimum conductivity Junction Temperature Cable Diameter Notes EPHS 7 bar (3.5 bar) BNC Epoxy 100 µS – 70 °C (80 °C) 0.8 m 12 mm – EPHM 7 bar (3.5 bar) BNC Epoxy 100 µS – 70 °C (80 °C) 4.5 m 12 mm – EPHL 7 bar ( …
Also in: Redox electrodes · Conductive probes – ECDC · Conductive probes – ECDI · Conductive probes – ECDHL
pH electrodes Electrode Pressure Connection Body Minimum conductivity Junction Temperature Cable Diameter Notes EPHS 7 bar (3.5 bar) BNC Epoxy 100 µS – 70 °C (80 °C) 0.8 m 12 mm – EPHM 7 bar (3.5 bar) BNC Epoxy 100 µS – 70 °C (80 °C) 4.5 m 12 mm – EPHL 7 bar ( …
Also in: Conductive probes – ECDC · Conductive probes – ECDI · Conductive probes – ECDHL · Conductive probes – EICDC
pH electrodes Electrode Pressure Connection Body Minimum conductivity Junction Temperature Cable Diameter Notes EPHS 7 bar (3.5 bar) BNC Epoxy 100 µS – 70 °C (80 °C) 0.8 m 12 mm – EPHM 7 bar (3.5 bar) BNC Epoxy 100 µS – 70 °C (80 °C) 4.5 m 12 mm – EPHL 7 bar ( …
Also in: Redox electrodes · Which system for your swimming pool · Installation · Technical data
pH electrodes Electrode Pressure Connection Body Minimum conductivity Junction Temperature Cable Diameter Notes EPHS 7 bar (3.5 bar) BNC Epoxy 100 µS – 70 °C (80 °C) 0.8 m 12 mm – EPHM 7 bar (3.5 bar) BNC Epoxy 100 µS – 70 °C (80 °C) 4.5 m 12 mm – EPHL 7 bar ( …
Also in: Redox electrodes · Basic components · Installation · What it can control
pH electrodes Electrode Pressure Connection Body Minimum conductivity Junction Temperature Cable Diameter Notes EPHS 7 bar (3.5 bar) BNC Epoxy 100 µS – 70 °C (80 °C) 0.8 m 12 mm – EPHM 7 bar (3.5 bar) BNC Epoxy 100 µS – 70 °C (80 °C) 4.5 m 12 mm – EPHL 7 bar ( …
Also in: Redox electrodes · Basic components · Installation · Remote control
… temperature compensation; cell installed in by-pass, in a flow-through probe holder. Parameter Range Resolution Cell Compensation Free chlorine 0 – 0.5 mg/l 0 – 2 mg/l 0 – 20 mg/l 0.001 mg/l 0.001 mg/l 0.01 mg/l SCL3N, SCL3S, SCL18 · ECL pH and temperature Tot …
Also in: System components · The controller · Closed and open cells · Measuring principle of the closed cell
pH electrodes Electrode Pressure Connection Body Minimum conductivity Junction Temperature Cable Diameter Notes EPHS 7 bar (3.5 bar) BNC Epoxy 100 µS – 70 °C (80 °C) 0.8 m 12 mm – EPHM 7 bar (3.5 bar) BNC Epoxy 100 µS – 70 °C (80 °C) 4.5 m 12 mm – EPHL 7 bar ( …
Also in: Which system for your swimming pool · Installation in the plant room · Technical data · Free chlorine with closed cell
… Optical (fluorimeter) Position In-line Applications Industrial process water Probe data sheets
Also in: Tracer probe · The controller · Verification of dosing by means of tracers · Controller data sheet
pH electrodes Electrode Pressure Connection Body Minimum conductivity Junction Temperature Cable Diameter Notes EPHS 7 bar (3.5 bar) BNC Epoxy 100 µS – 70 °C (80 °C) 0.8 m 12 mm – EPHM 7 bar (3.5 bar) BNC Epoxy 100 µS – 70 °C (80 °C) 4.5 m 12 mm – EPHL 7 bar ( …
Also in: Basic components · Installation · Remote control
pH electrodes Electrode Pressure Connection Body Minimum conductivity Junction Temperature Cable Diameter Notes EPHS 7 bar (3.5 bar) BNC Epoxy 100 µS – 70 °C (80 °C) 0.8 m 12 mm – EPHM 7 bar (3.5 bar) BNC Epoxy 100 µS – 70 °C (80 °C) 4.5 m 12 mm – EPHL 7 bar ( …
Also in: Operation · Basic components · System remote control
The reference electrode has a known potential, constant and independent of external conditions: it normally consists of a metal coated with one of its sparingly soluble salts, immersed in a solution containing the anion of the same salt. Silver chloride Ag/AgC …
Also in: The Redox potential in drinking water · Disinfectant measuring principles · The closed amperometric cell · Operation of a disinfection system
… residual on the hot water recirculation. SCL17 and SCL18 → Flow-through probe holder In PMMA, with sample flow rate adjustment and flow sensor, which stops dosing when there is no circulation. Probe holders → KMS MF dosing pump Multifunction solenoid dosing pu …
Also in: Type 1 – Volumetric and residual control · Type 2 – Residual control · Type 4 – Volumetric with one dosing pump · Type 3 – Volumetric with two dosing pumps
… pools, cooling towers, Legionella control, production and dosing. Details → Probes and electrodes pH, Redox, amperometric cells for chlorine, conductivity, dissolved oxygen and turbidity. Details → Accessories Pulse-output water meters, suction and injection l …
Also in: Principles of water treatment
… first adjust the pH and only then dose the hypochlorite are preferable. Two probes Two probes, mounted in a flow-through probe holder supplied with a water sample taken after filtration, measure pH and free chlorine and tell the pumps how much corrector and ho …
Also in: Amperometric cells: a direct, continuous measurement · The closed cell in operation · Open cell, closed cell and DPD method: advantages and limitations · With water presence sensor
… chlorinator instead of the hypochlorite pump. Compatible components EpHSpH electrode ECL6Open amperometric cell for free chlorine SCL 3S/20Closed (membrane) amperometric cell for free chlorine Compatible components EpHSpH electrode ECL6Open amperometric cell f …
Also in: Troubleshooting and error messages · Main features · Dosing modes · Remote control and remote supervision
… used and on the measuring controller required. Compatible components EpHSpH electrode ECL6Open amperometric cell for free chlorine SCL 3S/20Closed (membrane) amperometric cell for free chlorine Compatible components EpHSpH electrode SCL 9/200Closed (membrane) …
Also in: Troubleshooting and error messages · Dosing modes · Remote control and remote supervision · Main features
… pH value (SET POINT) is set: the pump measures the pH by means of a pH electrode and progressively reduces the injection frequency as the set value approaches, stopping when the SET POINT is reached. Models: Velon PO Proportional to Redox The required Redox po …
Also in: Model selection · Which model to choose · Remote control and connectivity · Troubleshooting and error messages
… the chemical and on the performance required. Compatible components Conductive probeConductivity, various measuring ranges Inductive probeConductivity, unaffected by polarisation and fouling ManifoldSampling, dosing and bleed-off with motorised valve Water met …
Also in: Main features · Two-way remote control · Three integrated control functions · Installation diagrams
… flow stabiliser, flow sensor and flow regulation; ECL21 without. Integrated probe holders ECL6, ECL7 (PG13.5) and ECL12 house the temperature, pH and Redox probes; the /E versions only the temperature probe.
Also in: Data sheet
… free chlorine, compensating for pH and temperature. SCL cells → Flow-through probe holder In PMMA, with sample flow rate adjustment and flow sensor, which stops dosing when there is no circulation. Probe holders → Dosing pump Solenoid dosing pump with adjustab …
Also in: Operation · System remote control · Colour-coded status indication · Closed (membrane) amperometric cells – Free chlorine
… display, stepper motor peristaltic pumps and pinch solenoid valves. Selective electrodes Electrochemical cell with permanganate-selective electrode and glass body. Screen Process timers, automatic two-point calibration, configuration of outputs and alarms.
Also in: Data sheets · Components of the PermaDos unit · PermaTest: residual measurement in automatic cycles · Installation examples
… closes the drain and signals the alarm, as protection against valve or probe failure. Pre-bleed Bleed-off carried out before biocide dosing, timed or down to a lower conductivity: during dosing and the subsequent lock-out, in fact, the drain remains blocked. L …
Also in: Verifying treatment effectiveness · Cycles of concentration · The 2015 Legionellosis Guidelines for cooling towers
… production follows the water flow or a measured value; the versions with probe measurement (MINI, MAXI and ULTRA) regulate it on the residual or on the Redox potential. Proportional to the water flow Production follows the circulating water flow, measured by a …
Also in: LOTUS MINI · Safety and monitoring · Accessories for the installation
… pump for the fertiliser and one for the acid, with independent settings. 3 No probes Suitable when the quality of the irrigation water is constant. 4 Alarms Level probes in the tanks: they signal that the product is running low.
Also in: Basic components · Installation examples
… and run the pump with 2 – 3 litres of water instead of the chemical; if the problem persists, replace the valves. Injection valve cloggedReplace the injection valve. The pump does not switch on No power supplyCheck the mains connection and that the voltage mat …
Also in: Model selection · Which model to choose · Dosing modes · Main features
… and run the pump with 2 – 3 litres of water instead of the chemical; if the problem persists, replace the valves. Injection valve cloggedReplace the injection valve. The pump does not switch on No power supplyCheck the mains connection and that the voltage mat …
Also in: Model selection · Which model to choose · Dosing modes · Main features
… and run the pump with 2 – 3 litres of water instead of the chemical; if the problem persists, replace the valves. Injection valve cloggedReplace the injection valve. The pump does not switch on No power supplyCheck the mains connection and that the voltage mat …
Also in: Model selection · Which model to choose · Dosing modes · Main features
The problem The gas released by the chemical accumulates in the pump head: the diaphragm compresses the gas instead of the liquid and the pump does not dose. With a standard pump head The purge valve must be opened to let the gas out every time the problem rec …
… SCL or ECL Details → Compare pH and neutralisation LDspH pH control, also with electrode self-cleaning. 0 – 14 pH Self-cleaning Details → Compare Conductivity LDsCD Conductivity measurement with conductive or inductive probes. 0 – 300 mS Details → Compare Turb …
… sections trap air bubbles, which the pump cannot remove. Tank without level probe When the chemical runs out, the pump continues to run, drawing in air, and must be primed again. Pump without foot filter The foot filter incorporates a non-return system that pr …
Also in: Correct installation · Why the pump does not dose
… and the parameters to be controlled: we will propose the most suitable system, probes and pumps. Contact us Controllers Electrodes and probes Dosing pumps
Pump head: PVDF or PP Compatible components EpHSpH electrode ERhSRedox (ORP) electrode Pump head: PVDF or PP Pump head: PVDF or PP Pump head: PVDF or PP
Also in: Which model to choose · Dosing modes · Troubleshooting and error messages · Main features
… other equipment. Proportional to Redox The set point is set in mV; the Redox electrode regulates dosing until the set value is reached. Proportional to residual chlorine dioxide The residual is set in mg/l: the self-cleaning 3-electrode amperometric cell, temp …
Also in: Technical data · System remote control · LOTUS AIR components · Accessories for the installation
The probe must be in contact with the water to be analysed: 1 In-line In a probe holder mounted directly on the pipe. Probe holders →
… water, and doses hypochlorite up to the set point. It uses a high-linearity electrode for drinking water. Advantages Measurement of the disinfecting power of the water with the high-linearity electrode for drinking water. Simple and economical solution. Limita …
Also in: System remote control · Volumetric dosing · Installation examples
… an encrypted connection and protected access. Overview On a single screen: probe readings, chemical levels, pump activation thresholds and active alarms, with the status of installations and devices (normal, warning, alarm, standby, not connected). Installatio …
Also in: Conductivity control · pH and conductivity · Volumetric dosing · Installation examples
… an encrypted connection and protected access. Overview On a single screen: probe readings, chemical levels, pump activation thresholds and active alarms, with the status of installations and devices (normal, warning, alarm, standby, not connected). Installatio …
Also in: Typical layout · Basic components · Closed (membrane) amperometric cells – Free chlorine · Installation examples
… agent set with the knob, from 0 to 800 or from 0 to 8,000 g/h; product level probe. Dosing pumps → Tank with safety bund In PE, with safety bund against spills and suction lance with level probe. Tanks →
Also in: With pulse-output water meter · Installation examples
… Redox WDpHRh The WDpHRh controller measures pH and Redox potential with the electrodes immersed in the tank and controls two integrated dosing pumps for the acid and the hypochlorite: the most economical solution for fire-fighting water tanks. Advantages The m …
Also in: System remote control · Installation examples
… an encrypted connection and protected access. Overview On a single screen: probe readings, chemical levels, pump activation thresholds and active alarms, with the status of installations and devices (normal, warning, alarm, standby, not connected). Installatio …
Also in: Troubleshooting and error messages · Main features
Drinking water Regulating pH pH electrode Measurement problems Insight → Drinking water Well water Analysis and disinfection Chlorine measurement Systems Insight → Swimming pools Private swimming pools pH and disinfectants Redox, cells and DPD Insight → Swimmi …
… or a 4/20 mA signal. According to the measured pHIntegrated controller and pH electrode. According to the measured RedoxIntegrated controller and Redox (ORP) electrode. According to the measured free chlorineIntegrated controller and amperometric cell. From a …
… with periodic checking of the residual. Dosing proportional to volume No probes to calibrate On tank, panel or skid Details Request a quotation Volumetric dosing
Also in: Basic components · Operation · Installation examples
… → Proportional Proportional to an external signal: 0-4/20 mA, 0-10 V, Redox electrode, pH, conductivity, amperometric cell. Measuring systems →
Also in: Station components · Skid-mounted versions
… data. With abrasive or corrosive chemicals, shorten the intervals. If the problem persists, contact us. Before sending the pump for servicing, empty the pump head of chemical and dry it.
Also in: Main features
… data. With abrasive or corrosive chemicals, shorten the intervals. If the problem persists, contact us. Before sending the pump for servicing, empty the pump head of chemical and dry it.
Also in: Main features
… calculates the quantity of product dosed. Flow sensor → Tank level The level probe with 4-20 mA output installed on each tank provides a signal proportional to the level: from its decrease the controller derives the product consumption and the remaining quanti …
Also in: Data sheet
… 24 VAC power supply. Tank In PE with safety bund, suction lance and level probe. Tanks →
Also in: Installation examples
… PVC circuits, AISI 304 steel parts; 2" drain fittings. Safety Radar level probes, integrated safety devices and a hermetically resealable powder container to protect the operator.
Also in: Installation examples
… manhole and filling and drain taps. Suction lance With foot filter and level probe. Details → Mixer For dissolving and mixing the products. Details → Dosing pump Installed on the tank. Details → Safety bund To contain the product in the event of leaks. Details …
… the product from the tank. Rigid PVC or PVDF tube with foot filter and level probe; at the top the suction hose connection, in the middle the tank fixing and the bleed hose connection.
… proportional to a 4/20 mA signal or to the Redox potential measured by an electrode.
… the required dosing. Level control The pump is supplied with a low-level probe for the tank: when the chemical runs out, it shows the alarm on the display and activates the corresponding output. Models: FCL Tell us about your application: our technical staff w …
… the absence of leaks from tubes and fittings and any corroded parts. If the problem persists, contact us. Before sending the pump for servicing, empty the pump head of chemical and dry it.
… or on a frame), also tailor-made. Some examples. On a panel Controller, pumps, probe holder and accessories mounted and wired on a wall panel. In a cabinet System panel and chemical tanks housed in a single cabinet. Wall cabinet Pipework, pumps and electrical …
… or on a frame), also tailor-made. Some examples. On a panel Controller, pumps, probe holder and accessories mounted and wired on a wall panel. In a cabinet System panel and chemical tanks housed in a single cabinet. Wall cabinet Pipework, pumps and electrical …
… or on a frame), also tailor-made. Some examples. On a panel Controller, pumps, probe holder and accessories mounted and wired on a wall panel. In a cabinet System panel and chemical tanks housed in a single cabinet. Wall cabinet Pipework, pumps and electrical …
Call or write to us: a technician will reply with a tailored proposal of controllers, pumps, probes and accessories.
